LEAD TIMES FOR SHIPPING

All controllers: ship next day
 

Questions? 1-800-258-0344

LED Controllers: Dimmers, Switches and Timers

EnergyStar Partner

LED Controllers from DEKOR™ are simply the top of the line and are specifically designed to our exacting standards for use with DEKOR™ products. Our dimmers, switches, and timers offer control and convenience. Create ambiance, save energy, and increase the lifespan of your DEKOR™ LED lights.  DEKOR™ is an ENERGYSTAR PARTNER.

We offer three types of controllers: the EZDIMMER and new waterproof EZDIMMERWP for dimming of LEDs and for remotely turning the circuit on or off plus the EZTIMER outdoor dusk-dawn-timer.  They have been designed for ease of operation and to be used individually or together to give you the control and flexibility you desire.

These controllers are designed to be used with DEKOR™ LED Transformers.  When other transformers are used in place of DEKOR™ transformers, this voids the controller warranty in its entirety.

EZDIMMERWP - WATERPROOF LED DIMMER & REMOTE

EZDIMMERWP Highlights

  • Waterproof housing and connectors for outdoor use
  • Adjust intensity from base unit or using remote
  • Full control of light intensity
  • Remote controlled
  • 70 ft range (with new battery)
  • Teachable base unit in the event of remote loss
  • Higher Input current (10 amp) can be used with any DEKOR Transformer
  • Small Footprint
  • 1 year Warranty

Accessories for this Product

EZDIMMERWP Waterproof LED Dimmer & Remote

The EZ Waterproof Dimmer is designed to dim your project lighting. It can be operated by either the remote which is provided with unit or by pressing the dimming buttons on the unit. The remote control has a range of 70 feet from the base unit with replacement batteries readily available at most department stores.

This units is designed for outdoor environments but also can be used with DEKOR’s indoor lighting products where water is present such as around or under a kitchen or bath sink.

Within this new model is the ability to teach a new remote in the event the old remote is damaged or lost. By pressing the UP and Power buttons simultaneously and waiting for the indicator light to blink rapidly you have just coded your new remote to the base unit.

Having this ability also allows for multiple remotes to be used at one location without the issue of them interfering with each other.

Instructions

EZDIMMERWP Instructions

EZDIMMERWP Remote Programming Instructions

Input Voltage 120 vdc
Input Frequency 60 Hz
Input/Output Current 10 amp (max)
Ouput voltage 12-0 vdc regulated
Approvals UL, CSUL, CE, RoHS
Dimensions W 2.0” x  H 1.1” x  L 3.8”
Connectors Watertight twist lock
Controls Dimming button, Brighten button, Mode Button
IP Rating 64
 

Remote Dimmer Specs

Type Key Chain RF
Remote Range 70' with antenna out and new battery
Control Range Zero - Full Intensity
 
Channel Single, Self Programming
Controls Dimming button, Brighten button
Battery 12v model 27a (included)
Prod ID Description UM MSRP  
EZDIMMERWP EZ Waterproof Dimmer with Teachable Remote EA $66.70 Order

EZDIMMER - LED DIMMER & REMOTE SUITED TO INDOOR APPLICATIONS

EZDIMMER Highlights

  • Full control of light intensity
  • Remote controller
  • 30 ft range
  • 1 year Warranty

Accessories for this Product

The EZ Dimmer is designed to dim your project lighting. It can be operated by either the remote which is provided with unit or by pressing the dimming buttons on the unit. The remote control has a range of 30 feet from the base unit with replacement batteries readily available at most department stores.

Wiring of the unit is simple. Just strip the transformer output leads and place in the + - contacts located on the input side of the controller. Wires that feed your lights are placed in the output + - contacts of the controller. The unit is not waterproof so a dry location or EZENCLOSURE is recommended.

Input Voltage 120 vdc
Input Frequency 60 Hz
Output Current 5 amp
Ouput voltage 12-0 vdc regulated
Dimensions W 2.3” x  H 1.6” x  L 4.5”
Connectors Spring Clamp
Controls Dimming button, Brighten button
Approvals UL, CSUL, CE, RoHS

Remote Dimmer Specs

Type Key Chain RF
Remote Range 30'
Control Range Zero - Full Intensity
 
Channel Single
Controls Dimming button, Brighten button
Battery 12v model 27a (included)
Prod ID Description UM MSRP  
EZREMDIM1 EZ Dimmer & Remote Single Channel EA $58.31 Order


EZTIMER

EZTIMER Highlights

  • Indoor or Outdoor
  • Photoactivated
  • Compatible with all DEKOR™ transformers
  • 1 year Warranty

Accessories for this Product

The EZ Timer is designed to set the time you want you project to turn your project on or off and forget about it. The unit is simple to install and program. Simply plug the unit into an outlet, plug one of our transformers into it and set the mode you want and your done. The timer is compatible with all DEKOR™ transformers.

Timer has the following program modes:

  • Off
  • Always On
  • Dusk to Dawn
  • On at Dusk for 1-8 hours
Type Photo activated timer
Controls Rotary dial
Input voltage 120 vac
Output voltage 120 vac at 8 amps
   
   
Mounting Single screw mounting hole
Mount unit vertically and a minimum of 18" above ground level
Environment Designed for outdoor installation and is suitable for damp locations. May also be used indoors as long as light is available to activate unit.
Prod ID Description UM MSRP  
EZTIMER EZ Photocell Timer EA $19.59 Order

EZENCLOSURE

EZENCLOSURE Highlights

  • Designed for Outdoor Use
  • Watertight design
  • Integrated lock hasp
  • Durable high impact polycarbonate
  • Molded in bosses
  • Smoke clear cover allows activation of photo cell
  • Easy to remove lid

Accessories for this Product


EZENCLOSURE IS ENCLOSURE ONLY AND
DOES NOT INCLUDE COMPONENTS SHOWN IN PICTURE

Keep Your Electrical Components Dry, Clean Up Your Installation with EZENCLOSURE

The enclosure is designed to house DEKOR™ LED transformers and controllers within an eye appealing housing.  Made from durable polycarbonate it can withstand the elements and is completely watertight.  This is important to protect your dimmer and timer which are not waterproof.  The NEMA unit is designed to be drilled and mounted as you see fit.

All projects are different so we do not suggest where holes need to be drilled in the unit for input and output lines other than the bottom of the unit to mitigate water migration.  Mounting bosses are located within the unit for mounting of components.

Enclosure mounting tabs are included with each box.

Dimensions 10.75 W X 13.5 L X 6.4 D
IP Rating 67 (WATERPROOF)
Approvals UL BOTH US AND CANADA
NEMA  
   
   
Prod ID Description UM MSRP  
EZENCLOSURE EZ Transformer and Controller Enclosure EA $173.60 Order